Skip to main content

conduction, polarization & magnetization

Materials contain charged particles that under the application of external fields respond giving rise to three basic phenomena known as conduction, polarization, and magnetization.


Conduction:

  • Conduction is the phenomenon whereby the free electrons inside the material move under the influence of the externally applied electric field with an average velocity proportional in magnitude to the applied electric field.

  • the conduction current density, is measured in amperes per square meter (A/m2).


JC= σE

  • σ is the conductivity of the material units are Siemens per meter (S/m).

  • J is the current density.


 Polarization:

          Polarization is the phenomenon of creation and net alignment of electric dipoles, formed by the displacements of the centroids of the electron clouds of the nuclei of the atoms within the material, along the direction of an applied electric field.




  • relationship between D and E, which is given by D = εΕ .



  • considering polarization in to account electric flux density is given as D = ε0Ε + P.


ε0 = 8.85* 10-12  (permittivity of free space)

P is the polarization vector or dipole moment per unit volume.

polarization

 Magnetization:

Magnetization is the phenomenon of net alignment of the axes of the magnetic dipoles, formed by the electron orbital and spin motion around the nuclei of the atoms in

the material, along the direction of the applied magnetic field.

  • The relation between the B and H is given as H=B/μ

  • μ is permittivity of material measured in newton per ampere square or Henry per meter.


                                     B= μ0 H + μ0 M

where μ0 = 4π * 10-7, M magnetization vector or magnetic dipole moment

magnetic

 

 

 

 
Labels:

Comments

Post a Comment

Popular posts from this blog

BJT (bipolar junction transistor)

A bipolar junction transistor is a three terminal semiconductor current controlled device with two P-N junctions. The three terminals are emitter(E), base(B) and collector(C). the emitter junction is heavily doped, base is less doped and made very thin and collector terminal is moderately doped. Collector has grater size than emitter and base terminal is thinner than both. (The thinner the base, the stronger the E-C electric field, and the larger the impact of a small current injected into the base. Explained clearly in active mode operation below) emitter terminal is moderate in size. A BJT has two types of transistors: NPN transistor PNP transistor NPN transistor : In an NPN transistor a p-type material is sandwiched between two n-type materials. [gallery ids="979,978" type="rectangular"] PNP transistor : In a PNP transistor a n-type material is sandwiched between two p-type materials. [gallery ids="989,990" type="rectangular"] Oper...
2 comments
Read more

photodiode

Introduction : A photo diode is a semi-conductor device, with a p-n junction and an intrinsic layer between p and n layers. It can be used as a light detector, which involves the conversion of light into current or voltage depending on mode of operation. [gallery ids="867,866" type="rectangular"] construction :   Working : When a photon of sufficient energy strikes the diode, it creates an electron-hole pair. This mechanism is also known as the inner photoelectric effect. If it occurs at the junction these carriers are swept from the junction by the built-in electric field of the depletion region. Thus holes move toward the anode, and electrons toward the cathode, and a photo current is produced. The total current through the photo diode is the sum of the dark current (current that is generated in the absence of light) and the photo current, so the dark current must be minimized to maximize the sensitivity of the device. Mainly it is operated in two modes 1.  Photo ...
1 comment
Read more

Transistor

Introduction: A transistor is a semiconductor device which is used to amplify the signals as well as in switching circuits. Generally, it consists of three terminals emitter(E), base(B) and collector(C) and two P-N junctions. It is one of the active components. It was invented by John Bardeen, William Shockley and Walter Brattain in 1948, in Bell Telephone Laboratories. Transistors are divided into different types depending on their construction and operation. Transistors are basically classified into two types; they are Bipolar Junction Transistors (BJT) and Field Effect Transistors (FET). The BJTs are again classified into NPN and PNP transistors. The FET transistors are classified into JFET and MOSFET. Junction FET transistors are classified into N-channel JFET and P-channel JFET depending on their function. MOSFET transistors are classified into Depletion mode and Enhancement mode. Again depletion and enhancement mode transistors are classified into N-channel JFET and P-channel. d...
2 comments
Read more