Skip to main content

Posts

resistor & potentiometer

Resistor is a two terminal passive electrical component that implants electrical resistance. in electronic circuits, resistors are used to reduce current flow. ohm's law : The behavior of an ideal resistor is dictated by the relationship specified by ohm's law. Ohm's law states that the voltage (V) across a resistor is proportional to the current (I), where the constant of proportionality is the resistance (R). resistors in series & parallel : The total resistance of resistors connected in series is the sum of their individual resistance values. The total resistance of resistors connected in parallel is the reciprocal of the sum of the reciprocals of the individual resistors. resistor color code : 1 potentiometer :  it is three terminal variable resistor.

resistance & resistivity

Resistance is a measure of the opposition to current flow in an electrical circuit. Resistance is measured in ohms, symbolized by the Greek letter omega (Ω). Ohms are named after George Simon Ohm (1784-1854), a German physicist who studied the relationship between voltage, current and resistance. He is credited for formulating Ohm’s Law. The electrical resistance of a circuit component or device is defined as the ratio of the voltage applied to the electric current which flows through it. The higher the resistance, the lower the current flow and vice-versa. resistivity : The electrical resistance per unit length, area, or volume of a substance is known as resistivity. Table of resistivity Material Resistivity ρ (ohm m) Temperature coefficient α per degree C Conductivity σ x 10 7 /Ωm Ref Silver 1.59 x10 -8 .0038 6.29 3 Copper 1.68 x10 -8 .00386 5.95 3 Copper, annealed 1.72 x10 -8 .00393 5.81 2 Aluminum 2.65 x10 -8 .00429 3.77 1 Tungsten 5.6 x10 -8 .0045 1.79 1 Iron 9.71 x10 -8 .00651...

current

Like a river current is the flow of water molecules, electrical current is the flow of charged particles i.e electrons.   The SI unit for measuring an electric current is the ampere(the flow of electric charge across a surface at the rate of one  columb per second). One ampere of current represents one coulomb of electrical charge (6.24 x 10 18 charge carriers) moving past a specific point in one second.   Electricity flows in two ways: either in an alternating current  (AC) or in a direct current   (DC) . The difference between AC and DC lies in the direction in which the electrons flow. In DC, the electrons flow steadily in a single direction, or "forward." In AC, electrons keep switching directions, sometimes going "forward" and then going "backward." Alternating current is the best way to transmit electricity over large distances. Cause of the direction of flow of electrons Rotating magnet along the wire. Steady magnetism along the wire. Current per ...

voltage

Voltage, is is the difference in potential between two points  in an electric field. also called electromotive force. voltage is the   pressure from an electrical circuit’s power source that pushes charged electrons (current).           grater the voltage grater the flow of electric current. Voltage is symbolized by   V or E . The standard unit is the volt. One volt will drive one columb  (6.24 x 10 18 ) charge.such as electronics through a resistance of one ohm. Voltage can be direct or alternating. A direct voltage maintains the same polarity. In an alternating voltage, the polarity reverses direction periodically. The number of complete cycles per second is the frequency which is measured in hertz.

how mobile sim card works ?

sim (subscriber identity module): The first SIM card was made in 1991 by Giescke and Deviant of sagem communications in France.It is the Subscriber Identity Module that contains the integrated circuit to store the International Mobile Subscriber Identity or IMSI and the keys to identify and authenticate the subscribers on the communication system. The SIM is embedded in a smart smart card that can be removed and transferred to different mobile phones. The data stored in the SIM card includes a unique serial number called ICCID, International Mobile Subscriber Identity or IMSI, Security Authentication information, temporary information about the network, a Personal Identification Number or PIN and a Personal Unblocking code or PUK for unlocking. SIM card contain it’s internally memory in which stores the data, personal and financial information, identity for GSM/CDMA. Out of the many keys, the most important keys are ICCID, IMSI, Authentication key or Ki, Local Area Identification or LA...

The jargon

[caption id="attachment_43" align="alignnone" width="2717"] Be passionately curious[/caption]